It's easy to order and buy branding irons. However, Juno had decided to make his branding iron by himself. For making a branding iron, he bought brass screws, a 100w soldering torch, and 0.8mm (0.0315in) and 6mm (0.236in) milling bits. Brass screws were for the head of the branding iron.
As you can see, one of the milling bits was very thin, it was only 0.8mm (0.0315in). It was scary to use it because it seemed to be broken easily. Juno took the bulk of the branding with a 6mm (0.236in) milling bit and curved the detailed lines with a 0.8mm (0.0315in) milling bit. After finishing curving the brass screw, he fitted the brass screw to the soldering torch. Then, the job was done!
The next step was testing. It was an exciting moment, you know? Well, the result was very good! These pieces are the first pieces that have got branding iron marks on them.
From now on, we will put Juno's mark on puzzle. There are plenty of ideas in Juno's head and we will make them as a puzzle in order. I know it's worth waiting!
Yukari